atheros.c

Go to the documentation of this file.

/* Linux Prism II Stumbler - Utility Scan for 802_11 networks under Linux
 * 
 * File : $Name:  $
 * Project : WifiScanner (c) 2002 Hervé Schauer Consultants
 * Usage : This utility is written for use with IEEE 802.11 adapters based
 * on Intersil's PRISM II chipset (PCMCIA).
 * 
 * Base code was from prismstumbler Jan Fernquist <Jan.B.Fernquist@telia.com>
 * and wlanctl from www.linux-wlan.com
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * as published by the Free Software Foundation; either version 2
 * of the License, or (at your option) any later version.
 * 
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 * 
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
 *
 * $Id: atheros.c,v 1.2 2005/02/23 11:36:53 poggij Exp $
 */


// A lot of think is get from kismet
//  http://www.kismetwireless.net/

#include <include.h>
#include <src/atheros.h>
#include <src/wlan-ng.h>
#include <src/crt_io.h>

static char *ID = "$Id: atheros.c,v 1.2 2005/02/23 11:36:53 poggij Exp $";

// All extern value you want
//extern unsigned int DebugLevel;
//extern UINT8 SingleChannel;
//extern UINT8 TypeOfCard;
extern ConfigStruct config;
extern p80211_caphdr_t wlan_header;

static CaptureArg ca;
static char errbuf[PCAP_ERRBUF_SIZE];

//-------------
int selectChannelATHEROS(char *devname, int channel)
{
#define STR_MAX 80
  char str[STR_MAX];
  int result = 0;

/*
  if (config.SingleChannel) {
    // ???
    return 1;
  } else {
    // ???
    return 1;
  }
*/
  snprintf(str, STR_MAX, "iwconfig %s channel %d 2>/dev/null",
           devname, channel);
  debug(3, "%s\n", str);
  result += system(str);
  return 0;
  return result;
}

int shutCardATHEROS(char *devname)
{
#define STR_MAX 80
  char str[STR_MAX];
  int result = 0;

  // Turn off monitor mode
  snprintf(str, STR_MAX, "iwconfig %s mode managed", devname);
  debug(3, "%s\n", str);
  result += system(str);

  snprintf(str, STR_MAX, "ifconfig %s -promisc up", devname);
  debug(3, "%s\n", str);
  result += system(str);

  return result;
}

int openCardATHEROS(char *devname)
{
  char str[STR_MAX];
  int result = 0;

  // Turn on monitor mode
  snprintf(str, STR_MAX, "iwconfig %s mode monitor", devname);
  debug(3, "%s\n", str);
  result += system(str);
  snprintf(str, STR_MAX, "ifconfig %s promisc up", devname);
  debug(3, "%s\n", str);
  result += system(str);

  return result;
}


// Get packet from card
int getPacketATHEROS(unsigned char *buf, int maxlen)
{
  struct pcap_pkthdr pktHdr;
  u_char *ret;
  fd_set rs;
  p80211msg_lnxind_wlansniffrm_t *Sniff_Frame;
  static UINT8 wlan_payload[MAX_BUFFER_SIZE];

  FD_ZERO(&rs);
  FD_SET(0, &rs);

  ret = (u_char *) pcap_next(ca.pcap, &pktHdr);

  // If no problem and packet is enought big (with data)
  if ((ret)
      && (pktHdr.len >= sizeof(p80211msg_lnxind_wlansniffrm_t))) {
    if (memcpy_buff(buf, ret, pktHdr.len) == NULL)
      return 0;
    Sniff_Frame = (p80211msg_lnxind_wlansniffrm_t *) buf;
    // Fill Header
    wlan_header.version = 0;    // It's a reduced capture frame format
    wlan_header.length = 0;     // Not used for now
    wlan_header.mactime = Sniff_Frame->mactime.data;
    wlan_header.hosttime = Sniff_Frame->hosttime.data;
    wlan_header.phytype = phytype_dsss_dot11_b; // Not used for now
    wlan_header.channel = Sniff_Frame->channel.data;
    wlan_header.datarate = Sniff_Frame->rate.data * 5;  // datarate is in units of 100kbps.
    wlan_header.antenna = 0;    // Not used for now
    wlan_header.priority = 0;   // Not used for now
    wlan_header.ssi_type = 0;   // Not used for now
    wlan_header.ssi_signal = Sniff_Frame->signal.data;
    wlan_header.ssi_noise = Sniff_Frame->noise.data;
    wlan_header.preamble = 0;   // Not used for now
    wlan_header.encoding = 0;   // Not used for now
    // Fill data frame
    if (memcpy_buff(wlan_payload,
                    &buf[sizeof(p80211msg_lnxind_wlansniffrm_t)],
                    pktHdr.len - sizeof(p80211msg_lnxind_wlansniffrm_t)) ==
        NULL)
      return 0;
    if (memcpy_buff(buf, wlan_payload,
                    maxlen - sizeof(p80211msg_lnxind_wlansniffrm_t)) ==
        NULL)
      return 0;

    if (pktHdr.len <= sizeof(p80211msg_lnxind_wlansniffrm_t))
      // Don't return negative value
      return 0;
    else
      return (pktHdr.len - sizeof(p80211msg_lnxind_wlansniffrm_t));
  } else {
    return (0);                 // Noting to read
  }
}

int openPacketATHEROS(char *devname)
{
  int DataLink;

  ca.pcap = pcap_open_live(devname, 3000, 1, 0, errbuf);
  if (ca.pcap) {
    pcap_setnonblock(ca.pcap, 1, errbuf);
    DataLink = pcap_datalink(ca.pcap);
    switch (DataLink) {
    case DLT_PRISM_HEADER:
      debug(2,
            "pcap_datalink(ca.pcap) = %d = DLT_PRISM_HEADER\n", DataLink);
      ca.offset = 0x90;
      break;
    case DLT_IEEE802_11:
      debug(2, "pcap_datalink(ca.pcap) = %d = DLT_IEEE802_11\n", DataLink);
      ca.offset = 0;
      break;
    case DLT_AIRONET_HEADER:
      debug(2,
            "pcap_datalink(ca.pcap) = %d = DLT_AIRONET_HEADER:\n",
            DataLink);
      ca.offset = 0;
      break;
    default:                   //COOKED
      debug(2, "pcap_datalink(ca.pcap) = %d = COOKED:\n", DataLink);
      ca.offset = 160;
    }
    return 1;
  }
  return -1;
}

void closePacketATHEROS(void)
{
  pcap_close(ca.pcap);
}

---